Electrified Gas
Wall Sconces

   

All of our gas sconces have been converted to electric. The necessary parts needed to bring the fixture up to today's safety standards have been added.

A wall plate has been added to cover a modern electric box.  Originally, these would have screwed onto a gas jet which protruded from the wall.

Please click on the picture for a better view.

Click on the highlighted words to view details.

Thanks

When you find something you like, please click here to place your order.

Shipping is by UPS ground-insured  $8.95 for anything on this page.
Continental US-lower 48 only

To help the page load faster, 
sold items have been moved to the
Gas Bracket Sold Gallery

Vintage Lighting Quick Clicks
 Home
Ceiling
Gas Floor Oil Sconces Bed Porcelain Table 
Fabric Shades  Glass Shades Sconce Shields

 

Great pair of early gas sconces

Here is another pair of early gas sconces-c1910 in a less common style.  These are electrified-a newer back plate has been added to cover a modern electrical box.  Elegant lines-ready to hang.  The shades are included and are from the same period.  The overall height is 11 1/2 inches, the reach is 12 inches.  These are stationary-they do not swing. Standard base bulbs-up to 60 watts each are required.

EGS5029     pair    $495.00  SOLD

 

Here is a pair of Victorian swing arm gas wall sconces which have been converted to electric.  The extension is approximately 14 inches to the outer edge of the shade holder.  These have nice rope twist arms and very fancy detailed fittings.  The backplate is 4 inches by 6 inches and has been added to cover a standard electrical box.  These are offered with new signed Vianne acid etched shades.--other shade choices are available. Standard base bulb-60 watt maximun.

EGS 4051     $450.00 pair   

Here is an attractive pair of gas brackets-converted to electric and ready to hang.  These have square brass arms and angular fancy embossed fittings.  A back plate measuring 4 inches by 6 inches has been added to cover a standard electrical box.  The extension is 14 1/2 inches to the outer edge of the shade holder. These sconces are offered with older frosted shades in a greek key pattern. Other shade choices are available.

ESG 4201   $425.00 pair  

This is a pair of Victorian double swing arm gas sconces which have been converted to electric.  The extension to the out side edge of the shade holder is approximately 23 inches.  These have rope turned arms and fancy decorative fittings,  A 4 inch by 6 inch backplate has been added to cover a standard electrical box.  This pair is offered with new Fenton French Opalescent (clear and white opal) Daisy and Fern shades--other shade choices are available. Standard base bulb-60 watt maximum.

EGS 4052  $500.00 Pair

Single swing arm gas sconce

This solid brass late 1800's single swing arm gas bracket has been polished and electrified.  It has a decorative square arm and highly detailed fittings and gas key.  It is fitted with an older shade having alternating panels of smooth ribs and diamond points.  It measures 16 inches when fully extended-including the shade.

EGS  154    $150.00

jan29- 001.jpg (204555 bytes) This is an exceptional brass gas bracket from the 1880. This style is shown in the C. H. McKenney Co catalog of 1880 and I would suggest this is by McKenney though it is unsigned. The overall height is 17 inches and the reach is 15 inches.  This is stationary-not a swing arm.  A back plate has been added to cover a modern electric box.  The body of the sconce has a rose brass finish. The fittings are very decorative.  This is offered with a new, signed Vianne acid etched shade and hand cut Czech crystals.  A very elegant piece for that special spot. top Standard size socket.

ESG 436  $375.00 one only

jan29- 006.jpg (381235 bytes) We are offering a matched pair of these beauties.  A back plate has been added to cover a modern electric box.  These have unusual gas burners, patent dated Aug 2, 1904,  though the brackets are a little earlier. The burners hold shades with 3 1/4 inch fitters and are converted to electric.  There is embossing around each burner of crossed acanthus leaves.  The fittings are very decorative. The arms pivot from the center joint only. Folded, the reach is 13 1/2 inches--22 1/2 inches fully extended.  The overall height from the bottom of the back plate to the top of the shade is 15 1/2 inches. The 3 1/4 inch fitter shades are frosted on the bottom and clear on the top and are included. Candelabra base socket.

EGS 445  $475.00 pair Sorry-SOLD!!

Pair/Early Gas Sconces

Here is an impressive PAIR of electrified Victorian gas sconces.  The heavy cast brass back plates are original and measure 4 1/4 inches by 7 5/8 inches.  The overall height with the shade in place is 12 inches. This extends 10 inches from the wall.  The sconces are stationary-they do not swivel like the gas brackets shown here.  These are fitted with vintage pressed glass shades with a fleur de lis motif.

EGS 513      $375.00 PAIR SOLD!!

Dec_03_ 008.jpg (340135 bytes)

Here is a double swing arm gas bracket from the 1890's.  It has been electrified, polished and fitted with a back plate to cover a modern electrical box.  This has nicely embossed rod arms and very decorative fittings.  It has a vintage shade with a Greek key design. The back plate measures 6 inches by 4 inches.  The total extension is 26 inches including the shade.  One only.
GS 215          $185.00 
SOLD

Double Swing Arm Gas Sconce

Another double swing arm gas bracket from the late 1800's. This is polished, wired and fitted with a new back plate to cover today's electrical boxes.  This has very decorative embossed arms and highly detailed fittings.  It has been fitted with a vintage etched shade in a Greek key pattern.  This extends 23 3/4 inches from the wall to the outer edge of the shade holder and 25 inches to the outer edge of the shade. SOLD

EGS  404    $185.00

Single Swing Arm Gas Sconce

This swing arm gas wall sconce has been converted to use electricity.  When fully extended it is 16 inches from the wall to the outer edge of the shade. The shade is a new art glass piece tinted cranberry with a mini coin dot pattern.  The arm is square stock with highly detailed fittings and valve.

EGS 759      $150.00

Single Swing Arm Gas Sconce

This late 1800's single swing arm gas bracket is solid brass.  It has been polished and electrified.  The smooth arm is complimented by the fancy fittings and valve. It is fitted with an older shade having a stippled background with garlands of leaves with flowers at the ends.  It extends 16 inches from the wall to the outer edge of the shade.

EGS  155    $150.00

Single Swing Arm Gas Sconce

Here is another single swing arm gas bracket from the late 1800's.  It is solid brass and has been polished and electrified.  It has a decorative embossed arm with very fancy fittings and valve.  It extends 16 inches from the wall to the edge of the shade.  The acid etched shade has floral medallions all around.

EGS 156    $150.00

If you are looking for something specific, please email your request.  I may have it in stock! 

Vintage Lighting Quick Clicks
 Home
Ceiling
Gas Floor Oil Sconces Bed Porcelain Table 
Fabric Shades  Glass Shades Sconce Shields
OOAK Designer Pieces

Site Map
Eagle Emporium's Webshop | Antiques | Return Policy | About Us | Privacy Statement | Wholesale Info | Links | Email

 

 

Hit Counter